Rheem - Solaraide TC Solar Storage Tank

Available in 80 and 120-Gallon Models

-6 Year Tank Warranty.
-Brass drain valve.
-Rheemglas@ tank lining resists corrosion and prolongs tank life.
-Choice of two models: storage tank or single element water heater, both specially equipped for installation with residential direct solar systems.
-Cold water inlet brings cold water to tank bottom to prevent mixing with heated water.
-Anode rod equalizes aggressive water action for prolonged tank life.
-Patented R-Foam insulation process with R-value of 16.7.
-Cold water inlet, hot water outlet, relief valve and anode rod at top of tank for easy access and fast, economical installation.
-Special threaded stud located near the outlet for attachment of tank sensors.
-Temperature and pressure relief valve included.
-High efficiency heating element.
-Automatic temperature control.
-Collector feed and return fittings located at front of tank for convenient installation.
-Over temperature protector.
-Isolated tank design for better heat retention.

Model Number: 81VR80TC-1    
Tank Cap. Gals: 80    
Maximum U.L. Listed Wattage: 6000W  
Dimensions:"H"58-3/4, "D"24-1/2
Approx. Shpg. Wght. Lbs: 192

Model Number: 81VR120TC-1
Tank Cap. Gals: 120
Maximum U.L.
Listed Wattage: 6000W
Dimensions:"H"62, "D" 28-1/4
Approx. Shpg. Wght. Lbs: 336

WITHOUT HEAT EXCHANGE




WITH HEAT EXCHANGE





NOTES:
-All units furnished standard 240 volt AC.
-Units are shipped with a 4500-watt element. If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically
-Solaraide models meet all current state requirements for solar storage tanks. The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
-Side connect models are also available. See specifications sheet No. 101-1

Solaraid TC models meet or exceed the most demanding energy efficiency standards without an insulation blanket.